What size bolts for trans to block

Looking for the length and thread pitch to bolt 904 auto to a non magnum 360. How many might help as well thanks for the help.

this was posted somewhere a while back. apparently you can still get them at the dealer.

4- 6027865
2- 6024863

not sure on the bolt size,I go by socket size that fit the head of them

you will have 2 5/8 head bolts that go in to the lower holes from the front

one is captured behind the oil filter and the other is right next to a starter bolt

4 9/16 head bolts go in from the back around the bell housing

there is one more hole in the top middle that will be coverd up by the auto tranz but the manual bell housing would use it to make the 5th 9/16 bolt

i have a bucket full of bolts from mopars over the yrs,let me know and I will send a set to you

the starter will use a stud and nut/nut will be 11/16 IIRC... or 2 5/8 head bolts if it has been removed from the auto tranz bell housing

I have the flex plate to torque converter bolts as well if you need those 4 also

3/8 4 of them
7/16 2 of them

OH,thats why I am allways fused with bolt size

9/16 wrench for a 3/8 bolt

5/8 wrench for a 7/16 bolt

never was good at math

Four 3/8-16 1 1/4"long and one 7/16-14 1 3/4" long and one 7/16-14 2" long.