Posted By: 71hoserunner
window to metal bracket bonding ??? 71 road runner - 07/18/10 03:09 AM
The quarter glass on my 71 Runner has a etched in bird so they need to be replaced. I have a nice set of glass from a 71 without roll down rear windows but the glass does not have the bracket bonded onto the glass like the roll down windows do. I believe the glass is the same, but how do I remove the bracket from the bad glass and bond the other to it?
Any help would be appreciated.
Posted By: TooMany62s
Re: window to metal bracket bonding ??? 71 road runner - 07/18/10 10:59 AM
I had the same situation on my truck. I needed the metal track taken off one window and put it on another. I took it to a glass shop. They charged around $10.
Posted By: ahy
Re: window to metal bracket bonding ??? 71 road runner - 07/18/10 12:32 PM
The glass shop sounds like a good idea.
I had to re-bond a steel channel to glass once. I used some glass bonding adhesive from the hardware store. It worked well after I tightened the channel for good mechanical grip to the glass.
A good coating of paint stripper on the old channels covered with plastic wrap would probably soften the old adhesive. Let it work for several hours.