Moparts
Which way does the lock ring turn on sending unit?
Posted By:
michaelphbarnett
Which way does the lock ring turn on sending unit? -
07/18/10
02:07 AM
Which way does the lock ring turn to loosen it to take the sending unit out on a '70 Barracuda?
Posted By:
RapidRobert
Re: Which way does the lock ring turn on sending unit? -
07/18/10
02:12 AM
CCW
Posted By:
michaelphbarnett
Re: Which way does the lock ring turn on sending unit? -
07/18/10
02:31 AM
Thanks. I put a light on it and figured it out. It helps when I can see what I am working on.
Posted By:
RodStRace
Re: Which way does the lock ring turn on sending unit? -
07/18/10
03:03 AM
rightie, tightie, leftie loosie (at the top)
Posted By:
michaelphbarnett
Re: Which way does the lock ring turn on sending unit? -
11/08/12
02:23 AM
Do you have to replace the gasket everytime?
Posted By:
screamindriver
Re: Which way does the lock ring turn on sending unit? -
11/08/12
02:37 AM
Not every time...But take a good look at the gasket...If it's expanded,degraded, etc... Just spend the few bucks and snag another..
Posted By:
RapidRobert
Re: Which way does the lock ring turn on sending unit? -
11/08/12
02:44 AM
Check/clean the metal surfaces that contact the gasket on each side. If a new one is needed get one that is the same or nearly the same thickness as the original one
© 2024
Moparts Forums