Barracuda 1/4 window adjustment

Posted By: alraton

Barracuda 1/4 window adjustment - 07/07/10 05:02 PM

Anyone have any tips on properly adjusting the 1/4 windows? I've followed the shop manual as closely as I can and am unable to get the glass to hit the upper weatherstrip correctly, leaving a gap with the door windows. The car is a 1969 fastback. Thanks.

Posted By: babarracuda

Re: Barracuda 1/4 window adjustment - 07/08/10 12:29 AM

I have A 67 HT AND I AM HAVING THE SAME PROBLEM.I THINK WE NEED A PERSON WHO KNOWS QUARTER GLASS

Attached picture 6074255-P1010002.jpg

Posted By: minivan

Re: Barracuda 1/4 window adjustment - 07/08/10 02:04 PM

There should be a "stop" that controls the height of the glass.. Cant say for sure on your model of car... On my 67 B body there are two bolts that hold an "L" shaped "stop" inside the qrt panel.. Loosen these and adjust it up...

Posted By: RokketRide

Re: Barracuda 1/4 window adjustment - 07/08/10 03:39 PM

Quote:

I have A 67 HT AND I AM HAVING THE SAME PROBLEM.I THINK WE NEED A PERSON WHO KNOWS QUARTER GLASS

I had a bunch of difficulty on same car recently, but only on one side. What I figured out was that the small rail that is built into the car on the backside of the sheetmetal was pinched and not allowing the pivot roller to articulate properly. That was when I could even get all the rollers to stay in their places at the same time!