Posted By: AAR70
Pitman seal kit Question - 05/24/10 05:50 PM
Is there someone who know where I can buy a Pitman seal kit to my AAR cuda power steering?
Pitman seal kit Question
Posted By: 71scamp440
Re: Pitman seal kit Question - 05/24/10 06:53 PM
any good parts person from a real parts store should be able to help with that. these are edelman numbers. lower seal kit is #8517. complete pitman kit is number #8759. hope this helps.
Posted By: 71scamp440
Re: Pitman seal kit Question - 05/24/10 06:55 PM
i just noticed that your in denmark. if you cant find one let me know and i could order one and ship it over the pond.
Posted By: aarcuda
Re: Pitman seal kit Question - 05/24/10 07:12 PM
are you looking for the boot or the seal that goes in the power steering? i couldnt find the boot
Posted By: AAR70
Re: Pitman seal kit Question - 05/24/10 07:51 PM
I am looking for steering gear pitman shaft seal.I have here in denmark a Edelman kit with part # 8517 but the seals are to small.The part #8517 kit is for 1 1/8 inch shaft diameter but the correkt AAR size is 1 1/4 inch diameter.I think edelman part # 8516 is the right part #.
http://www.rockauto.com/catalog/x,carcode,1435881,parttype,7344,a,www.google.dk%2BSearch%2Bfor%2BSteering%2BSteering%2BGear%2BPitman%2BShaft%2BSeal%2BEDELMANN
http://www.rockauto.com/catalog/x,carcode,1231726,parttype,7344,a,www.google.dk%2BSearch%2Bfor%2BSteering%2BSteering%2BGear%2BPitman%2BShaft%2BSeal%2BEDELMANN
http://www.rockauto.com/catalog/x,carcode,1435881,parttype,7344,a,www.google.dk%2BSearch%2Bfor%2BSteering%2BSteering%2BGear%2BPitman%2BShaft%2BSeal%2BEDELMANN
http://www.rockauto.com/catalog/x,carcode,1231726,parttype,7344,a,www.google.dk%2BSearch%2Bfor%2BSteering%2BSteering%2BGear%2BPitman%2BShaft%2BSeal%2BEDELMANN
Posted By: autoxcuda
Re: Pitman seal kit Question - 05/24/10 08:43 PM
Does your car have an original AAR/TA fast ratio box? It will have a T/A casted into the side of it.
I'm not certain if those have the larger 1.22 output shaft dia. I didn't think so, but I am not 100% sure
The 1973 and up A/B/E bodies with power steering all had 1.22 output shaft. And WITH the right pitman arm you can put those in most earlier A/B/E bodies. Many times those get swapped in earier cars.
I'm not certain if those have the larger 1.22 output shaft dia. I didn't think so, but I am not 100% sure
The 1973 and up A/B/E bodies with power steering all had 1.22 output shaft. And WITH the right pitman arm you can put those in most earlier A/B/E bodies. Many times those get swapped in earier cars.
Quote:
I am looking for steering gear pitman shaft seal.I have here in denmark a Edelman kit with part # 8517 but the seals are to small.The part #8517 kit is for 1 1/8 inch shaft diameter but the correkt AAR size is 1 1/4 inch diameter.I think edelman part # 8516 is the right part #.
http://www.rockauto.com/catalog/x,carcode,1435881,parttype,7344,a,www.google.dk%2BSearch%2Bfor%2BSteering%2BSteering%2BGear%2BPitman%2BShaft%2BSeal%2BEDELMANN
http://www.rockauto.com/catalog/x,carcode,1231726,parttype,7344,a,www.google.dk%2BSearch%2Bfor%2BSteering%2BSteering%2BGear%2BPitman%2BShaft%2BSeal%2BEDELMANN
Posted By: AAR70
Re: Pitman seal kit Question - 05/24/10 08:59 PM
yes, the steering housing have T/A casted in the side of it ,and the shaft is 1,22 inch
Posted By: autoxcuda
Re: Pitman seal kit Question - 05/24/10 09:32 PM
Quote:
yes, the steering housing have T/A casted in the side of it ,and the shaft is 1,22 inch
Get the seal for a 73 and up B/E/A body that has the large output shaft. Search for a car like a 1974 Dodge Challenger 360 (5.9L)
I believe a 71 C-body will also have that 1.22 output shaft. I bet the seal for a 71 Chrysler Newport 383 is the same for 74 Challenger 360. Not 100% sure, I haven't looked it up on Rock Auto.
Alaskan T/A posted a factory TSB bulletin a month or so back that described some of the repair/service stuff for the Quick Ration power steering systems. I think it might have addressed the output seal in there. Can't remember.
Posted By: AAR70
Re: Pitman seal kit Question - 05/25/10 08:25 PM
Quote:Quote:
yes, the steering housing have T/A casted in the side of it ,and the shaft is 1,22 inch
Get the seal for a 73 and up B/E/A body that has the large output shaft. Search for a car like a 1974 Dodge Challenger 360 (5.9L)
I believe a 71 C-body will also have that 1.22 output shaft. I bet the seal for a 71 Chrysler Newport 383 is the same for 74 Challenger 360. Not 100% sure, I haven't looked it up on Rock Auto.
Alaskan T/A posted a factory TSB bulletin a month or so back that described some of the repair/service stuff for the Quick Ration power steering systems. I think it might have addressed the output seal in there. Can't remember.
Hey,thank you for help,
I have 8516 on order today.
Lau