Posted By: snuggles
rear engine mount? - 05/22/10 08:35 PM
finally put the driveline in after several years and the trans mount won't line up. The bolts pointing upward don't line up with the trans holes.I'm sure I'm missing something simple here hopefully can get back to it tomorrow.Car was a running driving car and is being put back together with all the same parts except a new poly mount. 74 duster 340 with 727 Thanks
Posted By: stumpy
Re: rear engine mount? - 05/22/10 08:42 PM
Have you tried turning the bracket around? Normally you attach the bracket to the trans loosely then line up the bracket in the crossmember and tighten everything down.
Posted By: snuggles
Re: rear engine mount? - 05/22/10 08:55 PM
I can try to turn it I checked the fsm and looks right though.I did have the bracket attached loosely but couldn't get it lined up. I'll try againh tomorrow may just need a fresh perspective
Posted By: stumpy
Re: rear engine mount? - 05/22/10 09:42 PM
Could you have the crossmember in wrong side to.
Posted By: Alaskan_TA
Re: rear engine mount? - 05/23/10 05:43 AM
Do you have the motor mount ears on the right sides of the engine block ears?
