Moparts
Transmission Cradle
Posted By:
moparman89
Transmission Cradle -
04/26/10
06:34 PM
Does anyone know where I can get a transmission cradle for a 727? I've had no luck in finding someone who sells them.
Posted By:
Dads426
Re: Transmission Cradle -
04/26/10
06:49 PM
Made one from a piece of plywood, angle iron bolted to one end with holes drilled for the top bellhousing bolts and a vertical 2x4 with a diagional brace just before the tailshaft to hold the trans upside down on a workbench. Works like a charm.
Posted By:
dOoC
Re: Transmission Cradle -
04/26/10
06:55 PM
ALL I did was use a 13 or 14 inch steel wheel(put the bell-housing in that) ...and use a simple jack-stand on the tail housing.
I used this combo on a couple-of-hundred transmissions....
© 2024
Moparts Forums