Seat Belt Conversion

Posted By: moparcanuk

Seat Belt Conversion - 04/15/10 11:16 AM

Does anyone know if a modern one piece seat belt would fit in a 69 B body?

I drive my GTX whenever I can and the 2 piece seat belt is a pain in the buttinskie. Not to mention that it knicks the paint on the bottom of my interior door panel when the small outside portion slips back into position because I forget to hold it when I unhook it.

Here in Ontario, you have to wear all components of a seat belt if they are installed in the car.

Posted By: Procommuter

Re: Seat Belt Conversion - 04/15/10 12:31 PM

I replaced mine with components from http://www.andoauto.com/
I also added shoulder belts in the rear for my son.

Posted By: moparcanuk

Re: Seat Belt Conversion - 04/15/10 01:21 PM

Quote:

I replaced mine with components from http://www.andoauto.com/

The muscle car menu option doesn't work.

Posted By: Gusteve

Re: Seat Belt Conversion - 04/15/10 04:55 PM

I used XV Motorsports 3-point belt: http://www.xvmotorsports.com/products/detail/index.cfm?nPID=113

The are a reseller - you can get them from the manufacturer for less, but I forget who that was. (It might have been the guys posted above).

They work good, but the driver's side is kindy crappy if you have a console. The part the mounts on the drivers' right side at the floor behind the console doesn't stick up high enough to be real convenient.

Posted By: 05dakota

Re: Seat Belt Conversion - 04/15/10 07:46 PM

ANDOVER sells the same belts.

Posted By: moparcanuk

Re: Seat Belt Conversion - 04/15/10 07:52 PM

Just wondering if a modern Mopar belt would fit.

Posted By: moparcanuk

Re: Seat Belt Conversion - 04/16/10 02:48 AM

Looks like Ssnake-oyl.com has them. Anyone used them?