Posted By: MonGoo$e
Switch to Manual Brakes. - 04/11/10 04:26 AM
73 Duster, front discs, Has power currently, the stroker will be pulling just under what it'd take to run a booster, plus, a car this light with good discs I don't think it's really needed.
I plan on getting a new Master cylinder anyways, what all do I need to swap exactly? I know I will need a manual brake push rod and the bushing...Isn't that all?
Posted By: 70AARcuda
Re: Switch to Manual Brakes. - 04/11/10 04:38 AM
that is all i did on my 73 duster..
replaced master cylinder with newer mopar with adapter for two bolts..
bought manual pushrod...slowly bent brake lines to line up with new master cylinder.
Posted By: MonGoo$e
Re: Switch to Manual Brakes. - 04/11/10 04:45 AM
good deal, thanks for the input
Posted By: RapidRobert
Re: Switch to Manual Brakes. - 04/11/10 01:48 PM
What 70AARcuda said just a M/C with the recess for the neoprene retainer and the MB pushrod. Best would be to get an alum M/C of the CORRECT bore size w the 4 bolt to 2 bolt alum adapter plate and I thought all manual pushrods were the same length but I happened to see 2 side by side and they are different and I dont know what they come out of so the MP adjustable pushrod MAY be needed to get your pedal where you want it.