HELP MANUAL MASTER CYL. SET UP DAIGRAM

Looking to put the master cylinder together on my challenger. Need to know the order of putting back together. Car came without master cylinder hooked up. I have the maual master cylinder, the steel plate, a gasket , plastic like gasket with a rubber sleeve and aluminum plate. My 73 sevice manual doesnt show the set up - go figure, any help would be appreciated

Can you post a pic of the parts? We can probably help with the correct order then.

I'm pretty sure the reinforcing plate goes on the front side of the firewall and the thin flat plastic squarish piece w the boot for sure goes right on the back side of the M/C

From the 73 Factory Parts Book

2

Thanks guys

also,when manual brakes,at least on -70 cuda(i think) there should be harness hangers/hooks on the upper bolts/studs of the reinforcement plate,am i right folks??i do not know what that mounting hardware looks like,but i hope someone with a camera chimes in,overandout