Where can I buy a single wire neutral safety switch?

This is for a 1968 904 automatic. I've done some looking around, but all I can find are the later model 3-wire ones.

Thanks!

I see them on Ebay all the time.Rocky

You could just use the center stud on the 3 stud switch as thats the ground for park and neutral. Ron

I thought you had to change something inside the tranny to use the 3 prong switch? I found a 1 prong switch at an old tranny shop. Only cost me 5 bucks to boot.

ebay, get the right one for your car. some are longer that mess with the rooster detent and make it tough to shift. like a 65-68 one in a 63 car, it needs to get shimed out a little even though it works.pushbutton is hard to push.

The comb in the trans has to be changed to use the 3 prong one.Rocky

eBay here....Make sure it's a 1965 to '68. No earlier.
Single pins looks simliar but there are different lengths of the detent end.

I'll post a picture of the different styles...

Bottom switch was used up to 1964

Aftermarket part numbers;
AL132F NIEHOFF
NS-9 STANDARD
NS6278 ECHLIN(NAPA)
NSW-12 BENDIX
S289 BORG WARNER
NS80X FILKO
NS8 GURANTEED PARTS
NS10 SORENSEN
2495537 MOPAR
2586994 MOPAR
If you cant find 1 i do have this one its nos Mopar