c body headers

anyone know if you can use small block B body headers in a 65 C body? i have a customer that wants headers for his small block c body and i cant find them anywhere

I would like to know that too... Unfortunately I dont think so. Was discussed on the dry dock, I think only have a chance with shorties.
Greets
Flo

TTi makes headers for 65-73 C's.
Not cheap,but the best fit money can buy.

Cannot remember but I think Hedmann or Hooker makes C body headers,too.
B body will not fit.
Steering column interference.

I think the ones they make are BB only.I doubt the Bs will fit even with a SB.Rocky

Go to
c-body dry dock
those guys are experts on the big c's and this subject is on the forum almost daily.
There are a few options, but most stick with the manifolds.
Not sure if TTI even has an application for headers.

i'll check em out. but i also need motor mounts to put a 360 in this thing, i was shocked when i called scuhmacher and they didn't have anything.

Your biggest issue is that the ONLY 65 C bodies that could get a small block from the factory were the ones sold in Canada or possibly other exports. Canadian ones are all I really have any familiarity with and I do know they could have the smaller engines but in the US none were ever made with either an LA or /6, all were either B or RB. So that makes the market a pretty small one.
Mike

A small block in a C body... Blasphemy!

I'm not sure if these Junior Mopar engines have shorty headers available for them but I know the bigblock motors do.

Lots of Furys. Polaras etc had SBs in 65.They were all C bodys.Oh and some even had /6s.Rocky

Rocky is right. I think the earlier poster forgot about the Poly A, which has a nearly identical block to an LA, and hence same motormounts as a 318LA.

The 65 C also has a goofy driverside motormount, and that might be the rason why Schumacher has no listing for it, smallblock 65s won't lead to a lot of sales.

the more i look for motor mounts the more i figure i'll just have to fab something up. i think the dakota shorty headers will work though.

Imperial Services probally has the motor mounts.My kid has a set of their polys in his 62 300.Rocky

Guess I'm gonna have to keep my eyes open more. I have never seen a US produced 65 C body with an original small block of any sort. Thanks for the learnin', maybe one of these days I'll actually see one of those rare beasties.
Mike

imperial services? do they have a web site?

Google Imperial Services.Rocky