Need pics for holes to be drilled

Need pics for holes to be drilled - 04/07/10 10:29 PM

My car came back from the body shop with the holes welded up, but not re-drilled for the stainless around the front and back windows (these are the holes for the attaching clips). Now I have to re-drill the holes. Any one have good pics without the stainless and clips in place? Closeups and the whole areas (front windshield, back glass) would be helpfull.
Thanks,
Mike

Posted By: bigblock340power

Re: Need pics for holes to be drilled - 04/08/10 12:59 AM

Oh, come on people, someones got to have some pics. Help a Mopar brother out.

Posted By: Stanton

Re: Need pics for holes to be drilled - 04/08/10 02:14 AM

Are you sure they're welded and not bondo'd !!

Why would a bodyshop weld all those holes up ?!?!?!

Posted By: bigblock340power

Re: Need pics for holes to be drilled - 04/08/10 06:15 AM

Quote:

Are you sure they're welded and not bondo'd !!

Why would a bodyshop weld all those holes up ?!?!?!

Yes they are welded. For some reason a lot of the holes were bad (would not hold the screws any more). So they all were welded.

Posted By: Kern Dog

Re: Need pics for holes to be drilled - 04/08/10 07:23 AM

Cool, car finally coming home, I like that. Hey, the method I have seen is to first use new clips with the bottom edge of the clip resting on the bottom of the channel. That should put them in the proper depth. as far as where to place each clip, I have 2 cars I can check and will be in the shop tomorrow, call me. I sit next to you at the CCM meetings selling raffle prizes, so you know who I am!

Posted By: Challenger 1

Re: Need pics for holes to be drilled - 04/08/10 10:58 AM

It's not crital where they go, there is 13 of them on a E body. Don't know what kinda of car your working on.

Posted By: bonefish

Re: Need pics for holes to be drilled - 04/08/10 02:24 PM

Quote:

It's not crital where they go, there is 13 of them on a E body. Don't know what kinda of car your working on.

trying to drill through weld is tough, as said its not critical where they go just space them out evenly and try not to hit the welded holes.

Posted By: bigblock340power

Re: Need pics for holes to be drilled - 04/08/10 02:37 PM

Quote:

Cool, car finally coming home, I like that. Hey, the method I have seen is to first use new clips with the bottom edge of the clip resting on the bottom of the channel. That should put them in the proper depth. as far as where to place each clip, I have 2 cars I can check and will be in the shop tomorrow, call me. I sit next to you at the CCM meetings selling raffle prizes, so you know who I am!

Well you weren't there last Tuesday. We all missed your verbal banter. On the up side I did win the door prize. I seem the remember people calling you names on the way out of the meeting. HA! I'll call after 8:00 sometime.
Mike

PS I tried calling, nothing. All I have is your home #. I'll be sanding on the trunk.

Posted By: bigblock340power

Re: Need pics for holes to be drilled - 04/10/10 12:47 PM

Thanks to Frankenduster for letting me inspect his Dusters. Most helpful. Now on to the task at hand.

Posted By: Kern Dog

Re: Need pics for holes to be drilled - 04/11/10 09:04 AM

Well, anyone that knows me is aware that I like to help the "little people". hehehehehehe.