front suspension ride hight

hi guys ..need info on the stock ride hight of a 69 charger 440 R/T ..
any pictures where to measure it ... appreciate anyhelp guys

From the FSM: Measure distance from lowest point of one adjusting blade to floor and from lowest point of steering knuckle arm to floor. The difference is 1-7/8" ±1/8"
The picture shows them measuring on the inside of the control arm on the round part of the adjuster blade, and the bottom of the ball joint that they call the knuckle. The ball joint is lower than the adjuster.

thanks for the quick reply Dude

can't find that section in my FSM ... may be some pages are missing don't say anywhere ride hight ....... ????

Looks like this. However, be warned that you may not like the ride height after it is set to factory specs. Too high in the nose, IMO.

thanks for the picture appreciated ..i see too high ..just going to have a look see