Throttle Cable question

I have a '68 383 RR. I have an RPM Performer manifold and an Eddie 800 cfm carb.

I purchased Andy's throttle bracket kit for this set-up. My throttle cable is too short for this set-up.

In the ARENGINEERING information sheet Andy recommends getting a longer throttle cable from possibly a 6cyl as they had longer cables.

Anyone have a part number or suggestion where to get this "longer" cable?

Thanks
Frank

I go junk yarding and look for the leaning tower of power.

In the archives:
http://www.moparts.org/Tech/Archive/fuel/24.html
Ron

Great throttle cable link... wish I would have had this a couple weeks ago. Thanks for posting it.

There should be another throttle cable list in the tech archives that I wrote. Mine had all the factory part numbers still available from local dealers. It is probably obsolete now but some of them might still be available.

Last time I went to the dealer the longest cable still available that fit the muscle cars was from a big block pickup truck.

Thanks guys,

The search begins...(but much easier with the listed info)

Frank

These folks have a couple.

http://www.bouchillonperformance.com/BPEcables.asp

And tons here:

http://www.woodys-auto-supply.com/mobile/mobile-sitemap-catalog.asp?id=autoparts&cat=PCA-000