Best plug wires?

Posted By: Dusted_Ya

Best plug wires? - 03/23/10 02:41 AM

Is the lower the resistance the better the plug wire? If I'm using a resistor plug how is that different than a std plug? If I'm using a resistor plug and a Pertronix ignition system what is the best plug wires to use for hot street use?

Posted By: 340dart4spd

Re: Best plug wires? - 03/23/10 02:52 AM

Quote:

Is the lower the resistance the better the plug wire? If I'm using a resistor plug how is that different than a std plug? If I'm using a resistor plug and a Pertronix ignition system what is the best plug wires to use for hot street use?

FIRECORE50 http://www.firecore50.com/

Posted By: WILD BILL

Re: Best plug wires? - 03/23/10 02:54 AM

Best plug wire out there...

http://www.firecore50.com/

Send a pm to sunroofgtx

Rick will Take good care of you

Posted By: 71383beep

Re: Best plug wires? - 03/23/10 03:07 AM

Quote:

Best plug wire out there...

http://www.firecore50.com/

Send a pm to sunroofgtx

Rick will Take good care of you

Posted By: Dusted_Ya

Re: Best plug wires? - 03/23/10 03:16 AM

Well they'd better be an improvement over the new Accel High Temp Super Stock wires on it now cause the suck! Arcing all over the place!

Posted By: WILD BILL

Re: Best plug wires? - 03/23/10 03:22 AM

IMO Accel's are some of the worst wires out there.

Rick's wires are even being used by NHRA pro teams. He's got great stuff and is one of the best guys I know

Posted By: RapidRobert

Re: Best plug wires? - 03/23/10 03:23 AM

Quote:

Arcing all over the place!

Are they arcing just at the plug boot or along the route back to the dist

Posted By: Dusted_Ya

Re: Best plug wires? - 03/23/10 04:02 AM

All over but a couple are arcing at the plug boot.

Posted By: sunroofgtx

Re: Best plug wires? - 03/23/10 04:32 AM

Thanks, guys. What ignition are you using? What coil? Might be over-powering the wire. Want to check out our website? Feel free to call me with any questions you might have. Oh, and no. Lower resistance does not always mean better wires. If it were, we would all be using solid strand.

www.customwiresets.com