Moparts

Voodoo hyd cam What do you thing, ? NEW PICS.

Posted By: sixty7gtx

Voodoo hyd cam What do you thing, ? NEW PICS. - 03/22/10 11:28 PM

Voodoo Hyd Cam Kit - Chrysler 361-440 Three Bolt 268/276
Product Description
Hydraulic. The most awesome 268 cam ever produced! Out-powers all others! This High Performance street cam likes 2400 RPM stall, 800 cfm carb, dual plane intake and headers. Makes un-equaled power to 6200 RPM with proper valve springs. Very strong cam with great street manners.

Advertised Duration (Int/Exh): 268/276
Duration @ .050 (Int/Exh): 226/234
Gross Valve Lift (Int/Exh): .494/.513
LSA/ICL: 110/106
Valve Lash (Int/Exh): Hyd/Hyd
RPM Range: 1800-6200
Includes: Cam Kit

Part Number: 60303LK

Attached picture 5881184-newmotor007.jpg
Posted By: Dougsmopars

Re: Voodoo hyd cam What do you thing, ? need help. - 03/22/10 11:35 PM

Thats a super cam in a mild motor. Makes a ton of power. Big blocks don't need more then 230 duration. Local racer here runs 9.5 at 140 in a 3000 pound car with a 243 duration cam. Motor makes 650 horse on the dyno. Of course the indy heads help. lol
Posted By: Mr.Yuck

Re: Voodoo hyd cam What do you thing, ? need help. - 03/22/10 11:36 PM

what's the rest of the combo, could run good could run like poo poo.
Posted By: sixty7gtx

Re: Voodoo hyd cam What do you thing, ? need help. - 03/22/10 11:37 PM

Quote:

Thats a super cam in a mild motor. Makes a ton of power. Big blocks don't need more then 230 duration. Local racer here runs 9.5 at 140 in a 3000 pound car with a 243 duration cam. Motor makes 650 horse on the dyno. Of course the indy heads help. lol



Ok thanks..
Posted By: sixty7gtx

Re: Voodoo hyd cam What do you thing, ? need help. - 03/22/10 11:39 PM

Quote:

what's the rest of the combo, could run good could run like poo poo.



edelbrook carb, 2400 stall 2.5 inch pipes. factory exhaust.
Posted By: Dougsmopars

Re: Voodoo hyd cam What do you thing, ? need help. - 03/22/10 11:47 PM

Use a dual plane intake and check to see if thats an 800 eddy carb. That cam will want more then 650 CFM.
Posted By: sixty7gtx

Re: Voodoo hyd cam What do you thing, ? need help. - 03/22/10 11:49 PM

Quote:

Use a dual plane intake and check to see if thats an 800 eddy carb. That cam will want more then 650 CFM.



Right now I have a 600, if need be I will change it.
Posted By: 68 Roadrunner

Re: Voodoo hyd cam What do you thing, ? need help. - 03/23/10 12:30 AM

My brother ran the next cam bigger:

Hydraulic. Hot Street cam, likes 2800 converter, Hi-Rise type dual plane intake with 850cfm carb, headers, 10:1 compression and 3.73 gears. Likes up to 200HP nitrous.

•Advertised Duration (Int/Exh): 276/284
•Duration @ .050 (Int/Exh): 234/242
•Gross Valve Lift (Int/Exh): .513/.533
•LSA/ICL: 110/106
•Valve Lash (Int/Exh): Hyd/Hyd
•RPM Range: 2200-6400
•Includes: Cam Only

Part Number: 60304


In a mild 440 and it ran really strong! He went to a roller cam and a 500 stroker so I bought it for my 383. These VooDoo cams seem to make good power.
Posted By: Dougsmopars

Re: Voodoo hyd cam What do you thing, ? need help. - 03/23/10 12:35 AM

The car will make more power with that cam with an 800 or 850 CFM carb. If you stick with Edelbrock get the thunder series carb.
Posted By: Mr.Yuck

Re: Voodoo hyd cam What do you thing, ? need help. - 03/23/10 12:50 AM

Quote:

Quote:

what's the rest of the combo, could run good could run like poo poo.



edelbrook carb, 2400 stall 2.5 inch pipes. factory exhaust.



I'll say it's not ideal for you then. Not near enough carb, not sure about your intake but a nice dual plane would work. You should have headers, your stall is borderline, a 3000 would work best and 3.91's.
Posted By: sixty7gtx

Re: Voodoo hyd cam What do you thing, ? need help. - 03/23/10 12:51 AM

Quote:

The car will make more power with that cam with an 800 or 850 CFM carb. If you stick with Edelbrock get the thunder series carb.



thunder series AVS carb ??
Posted By: Dougsmopars

Re: Voodoo hyd cam What do you thing, ? need help. - 03/23/10 12:53 AM

Converter is fine. All lunarti calls for with that cam is 2400. I have the next cam up and run a 2800 and it's a rocket. But you should get a dual plane intake. Factory HP manifolds will be fine.
Posted By: 67dodge67

Re: Voodoo hyd cam What do you thing, ? need help. - 03/23/10 04:41 AM

Quote:

Converter is fine. All lunarti calls for with that cam is 2400. I have the next cam up and run a 2800 and it's a rocket. But you should get a dual plane intake. Factory HP manifolds will be fine.



I run the 513 intake 533 exhaust cam in my 470 stroker. It is a PERFECT fit for a street car. I run an 830 Quik Fuel on a Eddy RPM intake on Eddy RPM heads. 2800 converter, 3.91s, 10.4:1 compression. VERY HAPPY with it!!

Best time so far is 11.89 at 113ish mph.
Posted By: ademon

Re: Voodoo hyd cam What do you thing, ? need help. - 03/23/10 05:33 AM

I run the one smaller in a stock 915 head 383 4- speed, 3.23, stock carb intake and exh with 4-hole spacer, few little tricks, Runs super strong !!! tons of low to mid falls off over 5,400rpm but i think thats due to the stock AVS.

Attached picture 5882145-68RR3834-speed(14).jpg
Posted By: DaytonaTurbo

Re: Voodoo hyd cam What do you thing, ? need help. - 03/23/10 05:39 AM

I run the same cam 60303. It's a good cam however I would highly suggest running headers instead of stock log exhaust manifolds, unless you have hp manifolds. Driveability is perfect, drives around town just like the stock cam did. If I had to do it over again I would go with a higher CR in the 10-11:1 range and step up to the 60305.
Posted By: sixty7gtx

Re: Voodoo hyd cam What do you thing, ? need help. - 03/23/10 10:51 AM

I want to thank everybody for the input.
Posted By: sixty7gtx

Re: Voodoo hyd cam What do you thing, ? need help. - 03/23/10 09:50 PM

totop
Posted By: sixty7gtx

Re: Voodoo hyd cam What do you thing, ? need help. - 03/29/10 07:05 PM

specs,

Attached picture 5894579-newmotor007.jpg
Posted By: Dougsmopars

Re: Voodoo hyd cam What do you thing, ? need help. - 03/29/10 09:21 PM

I run the 60304 cam. 513/533. I run a 28 to 3200 stall. Stock HP manifolds with stock 2 1/2 exhaust. Edelbrock performer intake and an 800 thunder series AVS carb. Mopar chrome box. Car runs super. Ton of low end power. I set it in 4 degree's advanced. Cam has excellent street maners.
Posted By: sixty7gtx

Re: Voodoo hyd cam What do you thing, ? need help. - 03/29/10 09:40 PM

Quote:

I run the 60304 cam. 513/533. I run a 28 to 3200 stall. Stock HP manifolds with stock 2 1/2 exhaust. Edelbrock performer intake and an 800 thunder series AVS carb. Mopar chrome box. Car runs super. Ton of low end power. I set it in 4 degree's advanced. Cam has excellent street maners.


Sounds like a nice set up.
Posted By: Dougsmopars

Re: Voodoo hyd cam What do you thing, ? need help. - 03/29/10 10:00 PM

Best cam i've used yet in a mild motor. Ton of low end torque. I'm a tire frier kind of guy.
Posted By: sixty7gtx

Re: Voodoo hyd cam What do you thing, ? need help. - 03/29/10 10:50 PM

cool, thanks,

Attached picture 5894970-newmotor001.jpg
Posted By: Dougsmopars

Re: Voodoo hyd cam What do you thing, ? need help. - 03/29/10 10:57 PM

Great looking motor there.
Posted By: sixty7gtx

Re: Voodoo hyd cam What do you thing, ? need help. - 03/30/10 12:40 AM

Quote:

Great looking motor there.



thanks more pics comming soon.
Posted By: sixty7gtx

Re: Voodoo hyd cam What do you thing, ? need help. - 04/09/10 04:07 PM

any more input from members.?
Posted By: Dougsmopars

Re: Voodoo hyd cam What do you thing, ? need help. - 04/09/10 08:38 PM

Most guy's here use the 603. It's a bit smaller. They both run really strong.
© 2024 Moparts Forums