Moparts

Whats the best tranny pan gasket for 727 ?????

Posted By: Dougsmopars

Whats the best tranny pan gasket for 727 ????? - 03/07/10 06:33 PM

I'm looking to see what you guys think is the best tranny pan gasket for a 727. Time for a fluid change.
Posted By: NITROUSN

Re: Whats the best tranny pan gasket for 727 ????? - 03/07/10 06:34 PM

Get the Mopar reuseable one from a dealer.
Posted By: MonGoo$e

Re: Whats the best tranny pan gasket for 727 ????? - 03/07/10 06:41 PM

agreed on that Mopar gasket.
Posted By: stumpy

Re: Whats the best tranny pan gasket for 727 ????? - 03/07/10 06:44 PM

From the tech archives. http://www.moparts.org/Tech/Archive/auto/25.html
Posted By: BDW

Re: Whats the best tranny pan gasket for 727 ????? - 03/07/10 06:52 PM

Expensive but worth every penny.
Posted By: Dougsmopars

Re: Whats the best tranny pan gasket for 727 ????? - 03/07/10 06:59 PM

Works for me. I'll order up one tomorrow. Thanks
Posted By: 1_WILD_RT

Re: Whats the best tranny pan gasket for 727 ????? - 03/07/10 07:08 PM

Most dealers have them on the shelf as it fit Dodge trucks up till very recently...
Posted By: jbcuda

Re: Whats the best tranny pan gasket for 727 ????? - 03/07/10 09:18 PM

i have aftermarket pan tried cork ,rubber,gasket maker and all would not give me 100 percent seal. so i got the one from dealer worked great!
Posted By: stumpy

Re: Whats the best tranny pan gasket for 727 ????? - 03/07/10 09:37 PM

Quote:

Most dealers have them on the shelf as it fit Dodge trucks up till very recently...



They fit the A518 trans.
Posted By: 69L78Nova

Re: Whats the best tranny pan gasket for 727 ????? - 03/08/10 01:32 AM

I never had a problem with cork. Thats what Ive always used. No sealer, no seep, no drip
Posted By: dOc …

Re: Whats the best tranny pan gasket for 727 ????? - 03/08/10 02:12 AM

Quote:

I never had a problem with cork. Thats what Ive always used. No sealer, no seep, no drip




THERE you go ... cheap and no seep ..

JUST make sure you have a straight and flat pan-rail and do NOT over-torque the bolts.

I have had the same CORK gasket on my 62 since the mid-70's ....had the pan off numerous? times .. no SEEP ...and cheap.

Posted By: Chilort

Re: Whats the best tranny pan gasket for 727 ????? - 03/08/10 06:37 AM

The new one, like what has been said. But not torqued to 150 inlbs or so as specified. I go about 80-100 inlbs.
Posted By: 70B5Cuda

Re: Whats the best tranny pan gasket for 727 ????? - 03/08/10 01:51 PM

Anyone have the part number for the mopar one?
Posted By: Moparzrule

Re: Whats the best tranny pan gasket for 727 ????? - 03/08/10 03:04 PM

2464324AC
Posted By: challenger70

Re: Whats the best tranny pan gasket for 727 ????? - 03/08/10 03:32 PM

Quote:

Get the Mopar reuseable one from a dealer.




Those do not work on all 727's there are differences in casting along the front sealing edge. Mine leaks from there and found out the deal from John Cope during his seminar, I am going back to a regular cork/neoprene gasket
Posted By: Moe

Re: Whats the best tranny pan gasket for 727 ????? - 03/08/10 03:42 PM

You are supposed to put the new Mopar gasket on dry. I did, and it leaked live a sieve. I have an aluminum trans pan. Going to use "The Right Stuff" when I re-use it.
Posted By: challenger70

Re: Whats the best tranny pan gasket for 727 ????? - 03/08/10 04:17 PM

Quote:

You are supposed to put the new Mopar gasket on dry. I did, and it leaked live a sieve. I have an aluminum trans pan. Going to use "The Right Stuff" when I re-use it.




You probably have the same year(s) trans I do, check the front of the gasket with the contour of where it seals to the trans I bet they do not follow each other. Not sure if it's better to goop on sealant or just use a standard gasket.
Posted By: Chilort

Re: Whats the best tranny pan gasket for 727 ????? - 03/09/10 04:18 AM

I noticed that the new Mopar gasket didn't match up with my pan but it did match up with my trans. I've got 3 727s all '70 and older and all my pans look like this. I decided to give it a try anyway. So far so good and I've put about 100 miles on it. I'm thinking of getting a deep pan anyway so I can reuse this gasket.

Posted By: Anonymous

Re: Whats the best tranny pan gasket for 727 ????? - 03/10/10 02:50 AM

I've built thousands of transmissions, ONLY use cork, and have NEVER had a leak from the pan gasket........Like already mentioned, the pan rail needs to be flat and then tighten correctly.....

Wayne
Posted By: dusturbd340W5

Re: Whats the best tranny pan gasket for 727 ????? - 03/10/10 07:05 PM

Quote:

I've built thousands of transmissions, ONLY use cork, and have NEVER had a leak from the pan gasket........Like already mentioned, the pan rail needs to be flat and then tighten correctly.....

Wayne




with this however one of the big pluses with the new reusable gaskets is you can use it over and over and over for years to come try that with a cork or fiber gasket.
Posted By: dOc …

Re: Whats the best tranny pan gasket for 727 ????? - 03/10/10 07:12 PM

Quote:

Quote:

I've built thousands of transmissions, ONLY use cork, and have NEVER had a leak from the pan gasket........Like already mentioned, the pan rail needs to be flat and then tighten correctly.....

Wayne




with this however one of the big pluses with the new reusable gaskets is you can use it over and over and over for years to come try that with a cork or fiber gasket.




dust .... but I have had ONE cork gasket on mine since the late 70's .... I don't know how many times the pan has been off ....maybe 20? times.
Posted By: Anonymous

Re: Whats the best tranny pan gasket for 727 ????? - 03/10/10 09:47 PM

My pan stays on until something's wrong..... which shouldn't be very often.........Then it gets a new gasket when I buy an overhaul kit.....

I've got a '68 Roadrunner that I bought in 1987......I built the trans then, I've raced the crap out of it every year and the pan has never been off.........still has the same fluid in it that I put in it back then.......

Wayne
Posted By: dusturbd340W5

Re: Whats the best tranny pan gasket for 727 ????? - 03/10/10 11:48 PM

Quote:

Quote:

Quote:

I've built thousands of transmissions, ONLY use cork, and have NEVER had a leak from the pan gasket........Like already mentioned, the pan rail needs to be flat and then tighten correctly.....

Wayne




with this however one of the big pluses with the new reusable gaskets is you can use it over and over and over for years to come try that with a cork or fiber gasket.




dust .... but I have had ONE cork gasket on mine since the late 70's .... I don't know how many times the pan has been off ....maybe 20? times.




sorry I have been in the transmission buisness 25 years and I have a real hard time believing that at all I have seen what a cork gasket looks like after 1-2 years and you couldn't pay me enough money to reuse 1 the fiber gaskets are 10 times better than the cork and I wouldn't reuse 1 of those after any time but to each there own
© 2024 Moparts Forums