Posted By: MadMatt
Wide MP W2/W5/W7/W9 Cover on an LA motor? - 02/14/10 06:15 AM
Just curious if it's possible to use the wide MP aluminum valve covers P4876124 on an LA motor. Anybody out there done it? Any pros or cons?
Posted By: can.al
Re: Wide MP W2/W5/W7/W9 Cover on an LA motor? - 02/14/10 06:10 PM
..my mopar performance catalogue says yes.
Posted By: autoxcuda
Re: Wide MP W2/W5/W7/W9 Cover on an LA motor? - 02/14/10 07:42 PM
This guy is running them on Eddie heads. Just a picture I saw on another site. Not my motor.
Posted By: topside
Re: Wide MP W2/W5/W7/W9 Cover on an LA motor? - 02/14/10 09:10 PM
Pretty tight at the intake runners; my "regular" ones needed some modification to fit the runners on my Holley Strip Dominator intake. They're also so close to my (W2) pushrods that the gasket rails had to be narrowed at those locations, which might not be an issue with the wide ones.