Posted By: 440abody
Racer Brown cams - 02/13/10 01:02 AM
Anybody here using one, and what are your thoughts/opinions?
Posted By: dave571
Re: Racer Brown cams - 02/13/10 03:54 AM
There have been a few threads on this lately. search racer brown and you'll likely come up with something.
I have used, and still use, racer brown cams. Jim gives great service, and the cams make good power.
Posted By: rbstroker
Re: Racer Brown cams - 02/13/10 12:52 PM
He custom ground one for my big block stroker and I have been very happy with it.
Posted By: 440abody
Re: Racer Brown cams - 02/13/10 09:42 PM
Specifically looking at the SSH-25 for my Dart with a 440/727 and 3.55's.
Posted By: Belvedere2
Re: Racer Brown cams - 02/13/10 10:06 PM
I run that cam in my 340. Pulls hard with a nice idle.
Posted By: chewy
Re: Racer Brown cams - 02/13/10 10:48 PM
Every engine I build I put a Racer Brown Cam into. I havent had one fail yet.
Jim's currently grind a custom 273 Cam for my Dart. Based on ST-1 Mechanical profile. Should arrive any day. Cant wait.
....
Anyhow. Jim is doing a great job and I will continue to use his cam's for the forseeable future.