Posted By: redram95
727 END PLAY - 02/12/10 01:02 AM
Did not check end play before tear down. After rebuild I have .096 end play with both the .102 shims installed. Any ideas?
727 END PLAY
Posted By: John_Kunkel
Re: 727 END PLAY - 02/12/10 01:06 AM
What year?
Posted By: redram95
Re: 727 END PLAY - 02/12/10 01:09 AM
1987 3 speed non lock-up
Posted By: John_Kunkel
Re: 727 END PLAY - 02/12/10 01:21 AM
Are there two thrust washers on the output shaft? Sometinmes the thin steel washer goes missing and the 3-eared washer by itself won't provide enough thickness.
Posted By: redram95
Re: 727 END PLAY - 02/12/10 01:27 AM
I have the three tab washer and the shim,
Posted By: 451Mopar
Re: 727 END PLAY - 02/12/10 04:29 AM
is that the play in the output shaft or the input shaft?