Moparts

Fender turn signals....

Posted By: Edison62

Fender turn signals.... - 01/29/10 05:09 PM


Hello, I'm planning on adding a set of fender turn signals to my 1970 Super Bee clone project. My question is, are they the same style from say 1970 to 1975? Also, would anyone have the exact measurements as to where to drill the holes? Also, looking for the measurements for placement of the 383 emblems on the side of the fenders?

Thanks in advance,
Bryan

Attached picture 5767754-dodge_coronet_70_eua_05_01.jpg
Posted By: burdar

Re: Fender turn signals.... - 01/29/10 06:20 PM

I'm not sure about the B-bodies but the E-bodies changed after 72.
Posted By: NachoRT74

Re: Fender turn signals.... - 01/29/10 06:30 PM

same on B Bodies... since 73, all with phillips screw on top, more square shaped... earliers with stud and nut, and smooth shaped.
Posted By: 71383beep

Re: Fender turn signals.... - 01/29/10 06:31 PM

Quote:

I'm not sure about the B-bodies but the E-bodies changed after 72.



Same with B bodies.

No experience with 70's, but on 71/72 there were different markers too between Plymouth and Dodge. Dodge had smaller chrome ones that had 2 holes and mounted about 8" in from the nose. The Plymouth used longer painted ones that had 3 holes and were mounted either directly above the wheelwell or about 14" in from the fender on the hood depending on what hood you had. I don't think the 71/72 lights worked for the 70's but am not sure.

In 73 and up they went to a one size fits all wider chrome style that screwed in from the top and used this one for the entire lineup from A to E bodies.
Posted By: Edison62

Re: Fender turn signals.... - 01/29/10 07:03 PM


I'm soooooooo confused!! LOL!

Bryan
Posted By: moparmarks

Re: Fender turn signals.... - 01/29/10 07:11 PM

You what are the small chrome 70-2 Dodge sigs. All 73 and up A/B/E have the bigger ones with the screw in the middle.

B-E&A #252
http://www.beaparts.com/list_items.aspx?body=B&cat=E&subcat=15
Posted By: Edison62

Re: Fender turn signals.... - 01/29/10 08:39 PM

Quote:

You what are the small chrome 70-2 Dodge sigs. All 73 and up A/B/E have the bigger ones with the screw in the middle.

B-E&A #252
http://www.beaparts.com/list_items.aspx?body=B&cat=E&subcat=15



Thanks for the link but unless I read it wrong those fit 1970 E body/ 1969 B body / + some "A" body so I'm not sure if they are correct for the 1970 "B" body......?

Bryan
Posted By: moparmarks

Re: Fender turn signals.... - 01/29/10 09:16 PM

Quote:

Quote:

You what are the small chrome 70-2 Dodge sigs. All 73 and up A/B/E have the bigger ones with the screw in the middle.

B-E&A #252
http://www.beaparts.com/list_items.aspx?body=B&cat=E&subcat=15



Thanks for the link but unless I read it wrong those fit 1970 E body/ 1969 B body / + some "A" body so I'm not sure if they are correct for the 1970 "B" body......?

Bryan



Some of his applications are not always accurate.
They fit 70-2 Dodges, some Plymouth A and C-bodies. Never seen them on a Plymouth B-body. I myself don't think they fit any 69 B's.
His ones for 71 Plymouth also fit 72 Plymouths
Posted By: 71383beep

Re: Fender turn signals.... - 01/29/10 10:13 PM

Quote:

Quote:

Quote:

You what are the small chrome 70-2 Dodge sigs. All 73 and up A/B/E have the bigger ones with the screw in the middle.

B-E&A #252
http://www.beaparts.com/list_items.aspx?body=B&cat=E&subcat=15



Thanks for the link but unless I read it wrong those fit 1970 E body/ 1969 B body / + some "A" body so I'm not sure if they are correct for the 1970 "B" body......?

Bryan



Some of his applications are not always accurate.
They fit 70-2 Dodges, some Plymouth A and C-bodies. Never seen them on a Plymouth B-body. I myself don't think they fit any 69 B's.
His ones for 71 Plymouth also fit 72 Plymouths



that's the correct style for 71/72 chargers. If they did use them in 70 than it is a fair assumption that this was probably the one.

I don't recall seeing it on a body's though...
© 2024 Moparts Forums