Moparts

Lokar throttle bracket and cruise control?

Posted By: Blown_Hemi

Lokar throttle bracket and cruise control? - 03/27/07 11:47 PM

I have a Lokar throttle/kickdown cables and bracket mounted on my 440. Does anyone make a bracket so I can mount my factory cruise control cable to my engine? My Lokar bracket mounts to the carb so I would need a CC bracket, with factory clamp, that mounts to the manifold and be tall enough to connect to my 800DP, Performer RPM with a 1" spacer.
Magnum HP, AndyF???????????????

Attached picture 3395670-DriverssideEngine.JPG
Posted By: Blown_Hemi

Re: Lokar throttle bracket and cruise control? - 03/29/07 11:10 PM

Anyone have any ideas?
Posted By: cataclysm80

Re: Lokar throttle bracket and cruise control? - 03/29/07 11:21 PM

I think you're going to have to make that one yourself. I'd recomend starting with a stock throttle bracket and going from there. Since you'll only be holding the cruise cable with it, and not the throttle cable, you should be able to get away with chopping up a stock non cruise bracket.

I think I have a pic of the stock Big block cruise bracket if you need to see what it looks like. It's just a little different than the small block bracket.

Tav
Posted By: Blown_Hemi

Re: Lokar throttle bracket and cruise control? - 03/30/07 12:15 AM

Quote:

I think you're going to have to make that one yourself. I'd recomend starting with a stock throttle bracket and going from there. Since you'll only be holding the cruise cable with it, and not the throttle cable, you should be able to get away with chopping up a stock non cruise bracket.

I think I have a pic of the stock Big block cruise bracket if you need to see what it looks like. It's just a little different than the small block bracket.

I was just thinking the same thing. I have the stock 440 bracket with cruise around here somewhere. I also have a RB bracket without cruise on my old 440 in storage may go grab that tomorrow. Going to take some measurements and then call MagnumHP and see if his bracket will work. A pic would be great because I am not sure if I sold the old bracket off the 440.
Thanks.

Tav

Posted By: cataclysm80

Re: Lokar throttle bracket and cruise control? - 07/29/09 05:02 PM

Oops, looks like I forgot to do this. Better late than never huh?! I hope you got it all worked out. Maybe this pic can help someone else?

Bottom left is a used factory throttle cable clamp, which is the same part used as the cruise cable clamp on a cruise application.

Top left is a NOS big block throttle cable clamp / cruise cable bracket.

Top right is a NOS small block throttle cable clamp / cruise cable bracket.

Bottom right is a used factory nut for fastening either clamp to its respective bracket.

Tav



EDIT: Hmm, the pic didn't show up. Not sure why. Maybe the threads too old? If anyone needs the pic, just let me know and I'll post it for you elsewhere.

Tav

Attached File
© 2024 Moparts Forums