Posted By: sunroofgtx
How can you be sure of a converters stall ? - 01/10/10 09:48 PM
Here is the key ,....when it's out of the trans? Do I need to send it to a shop, and have them split it?
Posted By: 74fldart
Re: How can you be sure of a converters stall ? - 01/10/10 10:57 PM
A convertor factory can test it out without cutting it open. I dont know what they would charge to do it.
Posted By: Butch
Re: How can you be sure of a converters stall ? - 01/10/10 11:54 PM
Rick Sigman 440-232-9677 he does converters for Charlie Kuchenbecker.
Posted By: blownzoom440
Re: How can you be sure of a converters stall ? - 01/10/10 11:58 PM
hay rick i wonder if abruzzi would test it for you.
Posted By: joedust451
Re: How can you be sure of a converters stall ? - 01/11/10 12:27 AM
It'll also vary from engine too engine a bit, so you may want to make sure they can test it behind something close to what you have or building.
Posted By: sunroofgtx
Re: How can you be sure of a converters stall ? - 01/11/10 03:31 AM
Thanks guys. I had it made by Carl Byrd, near Norwalk Raceway, around 1996. I forgot what specs I had him build it at.. Thanks,.He passed away.
Posted By: blownzoom440
Re: How can you be sure of a converters stall ? - 01/11/10 09:41 AM
rick there may be some ID #'s stamped on it tohelp determine what it is nade to do.is there some1 to look at his records?