Need a machine shop in N.W Washington State?

Can anyone recommend a good machine shop in N.W. Washington State. Need to get a valve job and resurface on my stage VI heads... Thanks matt

Not sure how far north you are, but I feel very comfortable with Gary Pugh, at Performance Engine Development in Puyallup.

Oak Harbor, Whidbey Island. Thanks for the reply

We have been using Johnson's Machine Shop in Tumwater for our stuff lately but that is a bit of a drive.

Eds Machine shop in Muliteo is good or Jim Greens Performance Center is the best (425-774-3507) in Lynnwood. I usually use Jays Machine shop in South Everett at 112th & Hwy 99 because he is cheaper...425-347-8812

Eds is good but expensive

Jim Grees is expensive and I would let them build a Brigs engine. ,, friend had them rebuild a 340 in a 72 Duster. barely runs into the 15s.

DG Machine in Auburnis a good place

I've used DG Machine, too, and were satisfied. They threw in some extra machine work for free. They do everything, so they are not Mopar specific, but they do race NHRA, and win races.