Moparts
E-body torque shaft length/width
Posted By:
JRepucci
E-body torque shaft length/width -
01/09/10
09:44 PM
Does anyone know the length/width of an E-body torque shaft...1970 w/big block and an aluminum 513 bellhousing.
Jason
Posted By:
DAYCLONA
Re: E-body torque shaft length/width -
01/10/10
02:36 AM
Cuda, Challenger?
...8 3/4, DANA?
all different lengths because of wheelbase and axle choice.....bellhousing doesn't matter
Posted By:
Dan Brewer
Re: E-body torque shaft length/width -
01/10/10
03:19 AM
They are 9" long. Sm block is also 9". The difference between the 2 is where the bellhousing end arm is welded. Either one will work with a BB as long as you have the correct adjuster rod.
Posted By:
DAYCLONA
Re: E-body torque shaft length/width -
01/10/10
03:56 AM
I thought the OP wanted Driveshadt length, not Z bar info....oh well
Posted By:
JRepucci
Re: E-body torque shaft length/width -
01/10/10
07:31 AM
Thanks for the help.
© 2024
Moparts Forums