Posted By: sycboi
3-speed wiper questions... - 12/01/09 06:05 PM
I bought a 3-speed wiper motor from Jules. My car is a '70 Dart and came stock with a 2-speed set-up.
Besides a 3-speed switch what else do I need to convert my car?
3-speed switch harness to main dash harness?
Different arm that bolts to the motor drive stud?
Any help is appreciated...
-Michael
Posted By: JohnRR
Re: 3-speed wiper questions... - 12/01/09 06:54 PM
the harness is the same , the switch makes it work , but there is an external wire that should be on the switch that jumps between terminals on the rear. Also the arm off the drive stud is different .
Posted By: sycboi
Re: 3-speed wiper questions... - 12/01/09 09:15 PM
I was just told the harness is different and the little arm attached to the drive stud is the same.
Now I am really confused...
-Michael
Posted By: JohnRR
Re: 3-speed wiper questions... - 12/01/09 09:41 PM
Maybe it is ? I'm going by a B body , the dash harness is the same , the harness from the motor to the bulkhead is different , I would ASSuME A body is the same ?
Posted By: JulesdaWiperman
Re: 3-speed wiper questions... - 12/02/09 02:28 AM
ns1aar is correct.
You will need a crank arm ending with part number 272.
You will need a 3 speed switch. The dash harness remains the same.
You will need a tan colored nylon bushing instead of the 2 speed black one.
The 3 speed wiper motor black plug will plug into the same pod the 2 speed plugged into
on the firewall bulkhead.
Jules
Posted By: sycboi
Re: 3-speed wiper questions... - 12/02/09 02:36 AM
Thank you Jules, and others...
-Michael