Posted By: jsully
440 Pushrods with oil hole - 11/28/09 03:20 AM
I bought a set of Comp pushrods (ball/cup) to cut to length. They have a oil hole through both ends -- the original ones do not. I am running roller lifters and adjustable rockers
Will this cause problems?
Posted By: sam64
Re: 440 Pushrods with oil hole - 11/28/09 03:31 AM
i wouldn't think so they probablby just make them to work with or without push rod oiling.
Posted By: jsully
Re: 440 Pushrods with oil hole - 11/28/09 02:34 PM
Thanks for the reply.
Have not found any pushrods with oil hole in my 'chrysler' past.
I was worried / thinking they would 'drain' needed oil from the rocker (?) when engine is shut down.
Posted By: Prodart440
Re: 440 Pushrods with oil hole - 11/29/09 03:31 AM
I have been running pushrods with holes in them for 9 years on the street, no problems at all.