Posted By: slowpoke
Electric Choke connection - 11/03/09 12:52 PM
Where should I connect hot from the electric choke? I understand it should be from a source that is hot only when the engine is running, but am not sure where that would be? The ballast resistor?? If so which side??
Thanks in advance.
Posted By: 71_deputy
Re: Electric Choke connection - 11/03/09 01:10 PM
factory took it from the dark blue wire off the same side as the ballast resistor.
Posted By: RapidRobert
Re: Electric Choke connection - 11/03/09 02:22 PM
from the choke run a wire down several inches & tap into the wiring harness running along the inside edge of the valve cover & tap into the blue wire thats going to the alt field lead (on a 2 field terminal alt)
Posted By: slowpoke
Re: Electric Choke connection - 11/04/09 02:22 AM
Thanks for the info guys!!!