Posted By: BIGJOE30
CROSSMEMBER ID - 11/01/09 12:17 AM
CAN SOMEONE TELL ME WHAT THIS IS OUT OF??
THANKS JOE
THANKS JOE
CROSSMEMBER ID
Posted By: autoxcuda
Re: CROSSMEMBER ID - 11/01/09 12:22 AM
Quote:
CAN SOMEONE TELL ME WHAT THIS IS OUT OF??
THANKS JOE
Would have to have a width measurement between the bolt holes; inside to inside or outer to outer. Then compare to 66-70 B and 67-72 A-body. 70 B-body may have the spool type??
I do know it is not a:
E-body
71-up B-body
73-up A-body
Those all take the spool type rear trans mount.
Posted By: BIGJOE30
Re: CROSSMEMBER ID - 11/02/09 08:36 PM
THE INSIDE MEASUREMENT IS 9 3/4
THE OUTSIDE IS 16 1/2
THIS IS FROM THE CENTER TO CENTER OF THE HOLES
THANKS JOE
THE OUTSIDE IS 16 1/2
THIS IS FROM THE CENTER TO CENTER OF THE HOLES
THANKS JOE
Posted By: BIGJOE30
Re: CROSSMEMBER ID - 11/05/09 12:50 AM
so does anyone have any ideas on this??
Posted By: stumpy
Re: CROSSMEMBER ID - 11/05/09 05:47 PM
Joe turn off the caps. thanks.
Posted By: dmerc
Re: CROSSMEMBER ID - 11/05/09 10:01 PM
That looks like the same as in my 71 Duster. Maybe someone else can confirm.
Posted By: BIGJOE30
Re: CROSSMEMBER ID - 11/05/09 11:36 PM
WHY DO I HAVE TO TURN OFF CAPS. DOES THIS OFFEND YOU??? 
Posted By: 1hot68
Re: CROSSMEMBER ID - 11/05/09 11:39 PM
looks like a 66-70 b body 4 speed x- member to me.....But some of those a body ones look pretty close.
Posted By: stumpy
Re: CROSSMEMBER ID - 11/06/09 12:40 AM
Because it's impolite and hard to read and none of the rest of us on this board feel the need to YELL all the time. 
Posted By: BIGJOE30
Re: CROSSMEMBER ID - 11/06/09 02:07 AM
WHOS YELLING??? AND I THINK ITS EASIER TO READ.
BESIDES, DONT YOU HAVE ANYTHING BETTER TO DO.
I WILL NOW BE SURE TO RIGHT EVERYTHING IN CAPS,
HELL MAYBE EVEN BOLD, THATS JUST WHAT I PREFER!
SO WAAAAAAAHHHHHHHHHH!!!!!!!
JOE
BESIDES, DONT YOU HAVE ANYTHING BETTER TO DO.
I WILL NOW BE SURE TO RIGHT EVERYTHING IN CAPS,
HELL MAYBE EVEN BOLD, THATS JUST WHAT I PREFER!
SO WAAAAAAAHHHHHHHHHH!!!!!!!
JOE
Posted By: BIGJOE30
Re: CROSSMEMBER ID - 11/06/09 02:13 AM
PS I AM GOING TO LOOK FOR PEOPLE ONLY USING LOWER CASE LETTERS NOW. THEN I AM GOING TO ASK THEM WHY, BECAUSE I HAVE NO LIFE AND NOTHING BETTER TO DO.
JOE
Posted By: stumpy
Re: CROSSMEMBER ID - 11/06/09 04:07 AM
There's one in ever crowd and we know who ours is. His name is Joe.
Posted By: 540DUSTER
Re: CROSSMEMBER ID - 11/06/09 06:13 AM
I would rather read caps myself,with my old eyes.SEE WHAT I MEAN? DON'T BE HATEING ON OLD PEOPLE!
Posted By: RGC426
Re: CROSSMEMBER ID - 11/06/09 12:14 PM
HELLO. I'M A CAP TYPER ALSO, IT'S NOT THAT I'M TRYING TO BE IMPOLIT OR YELLING BUT I'M NOT A GOOD TYPER AND IT IS EASIEST FOR ME. SORRY!