Posted By: Alexdodge
rebuilt 4 speed 833 question - 10/14/09 11:45 PM
I purchased a rebuilt 4 speed to install in the 62 dodge. I won't be using it for a year or two because I'm restoring the car. Should I put fluid in it or just leave it dry while it sits on the shelf for the next year or two. Thanks, Alex
I finally got a picture of my neon sign on here thanks to my daughter.
Posted By: Stanton
Re: rebuilt 4 speed 833 question - 10/14/09 11:57 PM
Put some fluid in and spin it over to lube everything. ATF would do the trick.
Posted By: Alexdodge
Re: rebuilt 4 speed 833 question - 10/15/09 02:27 AM
What type of fluid is normally used in the A833?
And how much?
Posted By: Pntastar69
Re: rebuilt 4 speed 833 question - 10/15/09 09:51 AM
Fill it just below the fill hole. I use 80/90 gear oil.
Posted By: Anonymous
Re: rebuilt 4 speed 833 question - 10/15/09 02:29 PM
And get a tailshaft plug.
Posted By: Alexdodge
Re: rebuilt 4 speed 833 question - 10/15/09 10:55 PM
Tailshaft plug??? You mean its going to run out if I don't plug the tailshaft? What type of plug do I need?
Posted By: B5 GTX
Re: rebuilt 4 speed 833 question - 10/16/09 12:55 AM
An old slip yolk is best, just make sure it is clean.
scott
Posted By: Alexdodge
Re: rebuilt 4 speed 833 question - 10/16/09 02:19 PM
I'll do that! Thanks all.