Throwout bearing - Update

Are they all the same or are there good ones and junk ones? I need a 23 spline T/O bearing as quick as possible. Is it worth the 40 minute ride to Summit for a Hays or Centerforce or should I just go to the local AutoZone? Brewer is $5 cheaper than Summit but then I have to wait for it.

Thanks

I used a Timken with my CF setup.Got it at AZ.As long as its a quality bearing you should be alright.Rocky

Got the Timken at AZ. It's in and definately fixed the worst screeching sound I have ever heard come from a car.

FYI - I suspect that Timken is getting this bearing overseas. There are NO identifying marks any where on the bearing. The box says Distributed by Timken. Oh well it works for now. At least it was cheaper than any of the others I was looking at and I got it overnight. I'll check into getting a better one and put it in the next time the trans is out of the car.

MY CF bearing went out in about 200 miles.Ive had the Timken in for 4 years and no problems.Rocky