Moparts

Brake Line fitting thread size

Posted By: Bad Boy

Brake Line fitting thread size - 07/05/08 01:00 AM

Does any body know what the thread size is for the front brake line fittings that go into the distribution block on a 68 Barracuda? I am trying to install a line lock and the kit came with a brass "T" fitting but the fittings on the brake lines are larger than the threads inn the "T" fitting. None of the adapters in the kit fit. I need to buy some adapter fittings but don't know what size to buy.

Thanks
Posted By: txterry2

Re: Brake Line fitting thread size - 07/05/08 11:41 AM

Sounds like you need a fitting reducer(maybe 1/4 female to a 1/8 male).check with your local hardware store.
© 2024 Moparts Forums