Need 67 Barracuda Frame Dimensions ...from SHOP MANUAL

I took the 67 Cuda to the frame alignment shop.

Turned out the big rock that hit the K frame did compromise the front frame rails....but not by much....it doesnt even look that it shited at all in plain sight but when you measure it you can tell it did.....

Anyway....

Ill have the front frame pulled back into shape and after that Ill do the body work and then the full cage....

However I would like to hav ethe frame dimensions chart off the 67 Shop Manual.

Can anybody please post a pic of it???

THanks!

Domingo

I hauled my 71 4 door Dart to the shop this morning so it can donate all of it's front suspension to the Barracuda....

The 4 door is mint, so I can probably use trhat car for the frame dimensions...

However it'd be nice to have the unibody dimensions for the 67 cuda....

The 67 Barracuda stuff is in an addendum to the 1967 FSM, but it does not show the frame measurements.

Barry

OK well, I guess any 67-76?? A Body Frame measurements would work???

They are the exact same platform over the years...right?

last try...

As long as they're 108" wheelbase, they're the same. I've got the crash sheets for my 67 Barracuda somewhere, but I don't have a scanner to scan it any more. I've also got a digital image somewhere, too, but it's been archived, and I've got a bunch of disks to search. I'll try to find it and post it in the next day or so.

Clair

That would be great Clair!

The sooner the better though since they will start working on my car tomorrow morning and they told me to bring the chart with me....I told them I could get it for Monday!!!

maybe somebody else has it to post right away? If not lets wait for Clair...

WARNING DIAL-UP USERS!!! 860KB JPEG IMAGE ATTACHED!!

These are the frame specs for all 67-69 Valiants and Barracudas. Hope everything comes out nice and square!

Clair

THANKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Will post again in this thread in a couple days to let you know how it turned out...

Do you happen to have Dart specs by chance? I was looking for this a while back and could not find it. This would be perfect!
Thanks,
-Rob

I would bet the dart dimansions are exactly the same....I think both cars have the same wheelbase...and we all know that the subframes and all that are the exact same...

67-76 Darts (except Dart Sport/Demon) had 111" wheelbases, Barracudas and Valiants (2-door post, 4-door) had 108". I don't have the sheets for any Dodges, but I do have the earlier Barracudas, and 67-68 Furys.

Clair

Will this work?

I guess I should have read the whole post,if anyone needs 1970 or 1971 charts I can post them,all body styles.
Dave