Mopar Dana 60 ?

I located a 69 Camaro setting in a field, this was an old bracket car at best, it has a Dana 60 under it and it looks to be a factory built rear end.
The guy who owns the car started doing body work to it some 25 years ago, he stripped all the paint and then stuck it outside. the car is junk, the roof is caved in and rusted through, one quarter is cut off.
According to my brother in law who is a chevy guy and owns a few camaros said the camaro never came with a Dana 60. my question is what Mopar dana 60 would bolt up under a 69 camaro?

There should be numbers stamped in the axle on one of the tubes.

I believe that a b-body is a bolt in in a Camaro, but I'm not absolutly sure about it.
Every time I've seen a Dana in a Camaro it was a B-Body one.

My B body Dana spent some time in a Camaro, but now it's back home again where it belongs!

look for the snubber boss also

logan426

I tried to buy the car for the rear end thinking it was a Mopar Dana, the guy wants to put it under some old truck so he would not sell me the car. what should I offer him for the rear end?

If it is what you think it is, but ratty/nasty/unknown shape, offer no more than $500. Maybe $450 for openers.

I'd only do that after checking bom numbers/width/looking for the snubber mounting bosses etc