Who is running a Lakewood Bell in a BB B-body ?

I'm trying to figure out what sort of linkage issues I will have with my Lakewood. I've got a used Lakewood blowproof bellhousing that was in feets Belvedere. It has a stud mounted to the side of it, but I can't figure out what I need for a clutch fork with my 10.5" Clutch set up.

Do can I use the correct one for an iron bellhousing or do I need another fork?

Also, how will the bellhousing and linkage clear with headers on my car ?

I put one in a 68 GTX.
Linakage is the same.
I did have to trim the bellhousing on the r/s
to clear the headders.
That was with a set of 2 1/8 TTI's.

Quote:

---

I put one in a 68 GTX.
Linakage is the same.
I did have to trim the bellhousing on the r/s
to clear the headders.
That was with a set of 2 1/8 TTI's.

---

Thats what I needed to hear. I will be running Hooker 5903's on my car this time around.