Posted By: ireland383
1 bolt cam to a 3 bolt? - 08/18/09 07:25 PM
I want to change out my comp cam single bolt for a 60302 lunati 3 bolt. What is needed?
1 bolt cam to a 3 bolt?
Posted By: NachoRT74
Re: 1 bolt cam to a 3 bolt? - 08/18/09 07:27 PM
just the 3 bolts cam gear, and the bolts.
anyway I think you can say to Lunati ppl about make one bolt kind to you without extra cost really.
anyway I think you can say to Lunati ppl about make one bolt kind to you without extra cost really.
Posted By: Hoof Hearted
Re: 1 bolt cam to a 3 bolt? - 08/18/09 07:30 PM
Quote: "anyway I think you can say to Lunati ppl about make one bolt kind to you without extra cost really"
Huh?
Huh?
Posted By: Dads426
Re: 1 bolt cam to a 3 bolt? - 08/18/09 07:32 PM
Complete 3-bolt timing gear set (it may be hard to match a new gear to an existing set). Any 426 Hemi timing set will work.
Posted By: scratchnfotraction
Re: 1 bolt cam to a 3 bolt? - 08/18/09 08:48 PM
I read inbetween the lines on that one...he said.. "ask lunati about makeing him a single bolt cam" and "it may not cost extra if they do"
but they should already have it,IIRC
but he may want the 3 bolt cam for a geardrive unit
so,to the OP...why do you want to go from 1 to a 3 bolt cam???
but they should already have it,IIRC
but he may want the 3 bolt cam for a geardrive unit
so,to the OP...why do you want to go from 1 to a 3 bolt cam???
Posted By: ireland383
Re: 1 bolt cam to a 3 bolt? - 08/18/09 08:54 PM
I thought the 60302 only came in a 3 bolt. I would prefer a 1 bolt. Turns out my 275DEH is not working to well with my set up. 
Posted By: 440newport
Re: 1 bolt cam to a 3 bolt? - 08/18/09 09:25 PM
Quote:
I thought the 60302 only came in a 3 bolt. I would prefer a 1 bolt. Turns out my 275DEH is not working to well with my set up.
The 275DEH isnt a huge cam...a step or 2 bigger than the 60302 maybe, I don't see swaping those cams making a huge difference. Are you sure the cam is the problem?
Posted By: ireland383
Re: 1 bolt cam to a 3 bolt? - 08/18/09 10:20 PM
The 275DEH is not for good low end and is more for restrictive exhaust. I posted my build on the thread Iron heads vs. Stealths. I'm pretty sure the cam is lacking if anyone else has any ideas I would greatly appreciate it.
Posted By: NachoRT74
Re: 1 bolt cam to a 3 bolt? - 08/18/09 11:56 PM
Quote:
I read inbetween the lines on that one...he said.. "ask lunati about makeing him a single bolt cam" and "it may not cost extra if they do"
but they should already have it,IIRC
eeehm yes that's what I said... or I tried
eeehm, didn't think was wrong on the way I said
didn't know Lunati already had the 1 bolt in stock