Posted By: 69Mannix
how to remove hurst handle - 08/16/09 07:19 PM
The one that slides in. Any ideas?
Posted By: therocks
Re: how to remove hurst handle - 08/16/09 07:28 PM
Slide a feeler gauge along side the handle pushing down then it should pull out.I believe its a .015 gauge on the drivers side.Rocky
Posted By: T2R9
Re: how to remove hurst handle - 08/16/09 07:30 PM
Slide a .010 feeler gauge down between the shifter handle and the clip on the left side. Then pull! Sometimes it takes some WD40 in there to get the feeler to slide in.
Posted By: John_Kunkel
Re: how to remove hurst handle - 08/16/09 10:20 PM
Push down hard on the handle as you insert the feeler gauge, makes the lock tang release easier.