Holley Dual Feed Fuel Line

I have a holley 750 with a dual feed fuel line on a 400 but my coil is right in the way of the fuel line,I know iam not the only person with this so what are some ways i can get around the coil? Also what kind of fastener do i use to mount an ecu to my firewall? since i cant get a nut behind it what are my options? Thanks

Self tapping screws are the only real option

You can bend some lines to get around the coil. or go hog wild and order the SS setup out of MCG for 45 bucks. Prebent and runs the line away from the coil.

Thanks alot for that quick reply, does anyone have any pics of their fuel line setup with a holley dual feed? i can spring for pre bent stuff but would prefer to rig something myself.

Heres an option... I need to go back and clean it up but not bad for a quicky job... The coil bracket is a piece of 1" 12ga flatbar with three holes drilled in it one for a manifold bolt & two for the std coil bracket...The fuel line is patterned after the stock sixpack & hemi style lines & fittings..

Quote:

---

I have a holley 750 with a dual feed fuel line on a 400 but my coil is right in the way of the fuel line,I know iam not the only person with this so what are some ways i can get around the coil? Also what kind of fastener do i use to mount an ecu to my firewall? since i cant get a nut behind it what are my options? Thanks

---

There is a guy named Greg out of Colorado that sells 2 neat products, 1 is a hard fuel line for a dual-feed Holly and the other is a coil mounting bracket moving it forward for clearance. Both are of high-quality already fabricrated. I was going to make my own and until I found these, they work well highly recommended.

His # is 303_666_9882

Just my $0.015...