Moparts
361 Industrial engine in a 1968 L700 cabover truck
Posted By:
MoPar
361 Industrial engine in a 1968 L700 cabover truck -
08/10/09
07:48 PM
could someone tell me if this engine (it is the original engine) would have timing gears(no chain) or a common gear and chain set. thanks !!
Posted By:
gamagoat6x6
Re: 361 Industrial engine in a 1968 L700 cabover truck -
08/10/09
10:38 PM
It should have gears only and a three bolt reverse rotation cam. Those helical cut gears are a work of art, last forever and they should have been used on all big blocks.
Posted By:
dOrk !
Re: 361 Industrial engine in a 1968 L700 cabover truck -
08/10/09
10:44 PM
A 361 Ind motor ? ... a 413 itself is pretty weak as-is ...I could imagine how bad a 361 would be !!
I have only seen one-of-these in a pic on an eBay auction some time ago.
The gear drive? .. having one in this motor is maybe a 50/50 crap-shhot.
Posted By:
B5 Bee
Re: 361 Industrial engine in a 1968 L700 cabover truck -
08/10/09
11:04 PM
413HD gear drive, 361HD should look the same.
Anyone got one they don't need?
I can use the rev rotation cam that came in them also.
Posted By:
dOrk !
Re: 361 Industrial engine in a 1968 L700 cabover truck -
08/10/09
11:08 PM
HOW MANY do you want ? .. I have SEVEN 413's ...
Posted By:
B5 Bee
Re: 361 Industrial engine in a 1968 L700 cabover truck -
08/11/09
12:13 AM
Quit being a pack rat! How about getting off a gear drive set and rev rot cam?
Bring them to FL next time you come.
© 2024
Moparts Forums