Moparts

Big to Small U-Joint ..........

Posted By: Thread Ender1

Big to Small U-Joint .......... - 08/05/09 09:09 PM

Does anyone know off had who markets a big to small u-joint to run a small yoke diff with a big ujoint shaft in my Dart?
Posted By: stumpy

Re: Big to Small U-Joint .......... - 08/05/09 09:11 PM

From the tech archives link at the top of every page. http://www.moparts.org/Tech/Archive/shaft/4.html
Posted By: Thread Ender1

Re: Big to Small U-Joint .......... - 08/05/09 09:14 PM

Why thanks...didn't ever see that one.
Posted By: scratchnfotraction

Re: Big to Small U-Joint .......... - 08/05/09 09:15 PM

there ar 2 big u-joints

small 7260
big 7290
bigger 1330

there is a combo joint for the 7260/7290 and 7260/1330

Posted By: BDW

Re: Big to Small U-Joint .......... - 08/06/09 12:35 AM

http://www.theujointstore.com/cou.html
Posted By: hp383

Re: Big to Small U-Joint .......... - 10/14/09 01:54 AM

Quote:

there ar 2 big u-joints

small 7260
big 7290
bigger 1330

there is a combo joint for the 7260/7290 and 7260/1330






Just found this post.

What are the measurements and cap sizes off each:

7260
7290
1330

I am needing to adapt a front driveshaft from an 84 Ramcharger to a 77 3/4 ton with the HD44.

Parts counter showed both used the same size joint, but the 84 driveshaft has a smaller u-joint than the 77 3/4 ton.

Also what is the difference in the 93 Ramcharger front u-joint and the 84 Ramcharger front u-joint? They both carry a different number, but when compared visually they look the same
Posted By: hp383

Re: Big to Small U-Joint .......... - 10/15/09 12:35 AM

[crickets]chirp... chirp... chirp...[/crickets]
Posted By: BDW

Re: Big to Small U-Joint .......... - 10/15/09 12:37 AM

http://www.actionmachineinc.com/ujointmeasuringguide.aspx
Posted By: hp383

Re: Big to Small U-Joint .......... - 10/15/09 01:08 AM

Hey! Thank You!
© 2024 Moparts Forums