RB Cam + Lifters

Posted By: Alan

RB Cam + Lifters - 07/26/09 06:22 AM

OK, what's cam & a decent hydrualic lifter package for a 440 these days? Motor will be used for tooling around no racing what's the hot set up?

- Alan

Posted By: 493_DART

Re: RB Cam + Lifters - 07/26/09 08:01 AM

something similar to the old 484 mp cam , but id go with a "modern" grind ... Comp cams has some good ones

like this one:

http://www.summitracing.com/parts/CCA-CL21-224-4/

Posted By: therocks

Re: RB Cam + Lifters - 07/26/09 01:46 PM

The Summit cam works.Ran them and 1 is still going strong after 30 years.There are better cams but for the price they cant be beat.Ive ran all their Mopar cams.Rocky

Posted By: landon1

Re: RB Cam + Lifters - 07/26/09 03:55 PM

i thought about the summit cam for budget reasons, but went with a Comp XE268...if the motor's not going to be mostly stock, i think it's probably one of the best cams you could get.

Posted By: DaytonaTurbo

Re: RB Cam + Lifters - 07/26/09 04:02 PM

Quote:

i thought about the summit cam for budget reasons, but went with a Comp XE268...if the motor's not going to be mostly stock, i think it's probably one of the best cams you could get.

If you want something 1/2 a step up from the 268 but not as much cam as the 274/275HL Lunati's 60303 voodoo is a nice middle ground between the two.

Posted By: newbee69

Re: RB Cam + Lifters - 07/26/09 04:15 PM

Engle k56/58. contact rapid340, he will hook you up.

Posted By: landon1

Re: RB Cam + Lifters - 07/26/09 04:17 PM

Quote:

Quote:

i thought about the summit cam for budget reasons, but went with a Comp XE268...if the motor's not going to be mostly stock, i think it's probably one of the best cams you could get.

If you want something 1/2 a step up from the 268 but not as much cam as the 274/275HL Lunati's 60303 voodoo is a nice middle ground between the two.

that's the other one, but wasn't sure i'd have enough stall to run it and really didn't want to get into that

Posted By: CrAzYMoPaRGuY

Re: RB Cam + Lifters - 07/27/09 04:41 AM

I just went with a 270H Comp Cam in my Jensen, but the XE268 looks good IMO too...