Flywheel part number ID ?

Posted By: OzHemi

Flywheel part number ID ? - 06/29/08 12:46 AM

Would anyone happen to know what a 2264598 flywheel is?

I thought I had a site with all the flywheel part numbers on it, but must have been wrong

Thanks

Posted By: snuggles

Re: Flywheel part number ID ? - 06/29/08 01:07 AM

I'll take a guess and say 73 340.

Posted By: OzHemi

Re: Flywheel part number ID ? - 06/29/08 01:08 AM

Quote:

I'll take a guess and say 73 340.

Is that a <wink><wink> guess...

Or a..

GUESS

Posted By: snuggles

Re: Flywheel part number ID ? - 06/29/08 01:09 AM

I wonder if that fits a 68 340?

Posted By: OzHemi

Re: Flywheel part number ID ? - 06/29/08 01:11 AM

Quote:

I wonder if that fits a 68 340?

Quote:

73 340

You seem to be abit soft on your year sure-ity.

Posted By: snuggles

Re: Flywheel part number ID ? - 06/29/08 01:13 AM

73 was taking a shot at original app. Just happen to know of a 68 that is sans flywheel

Posted By: OzHemi

Re: Flywheel part number ID ? - 06/29/08 01:14 AM

Quote:

Just happen to know of a 68 that is sans flywheel

Wink wink....nudge nudge

Attached picture 4517881-nudge_nudge2.jpg

Posted By: MowP4rsn

Re: Flywheel part number ID ? - 06/29/08 01:16 AM

"Wink's as good as a nod! Say no MORE!"

Posted By: snuggles

Re: Flywheel part number ID ? - 06/29/08 01:19 AM

Quote:

Quote:

Just happen to know of a 68 that is sans flywheel

Wink wink....nudge nudge

Pictures of said flywheel may help "I.D." it

Posted By: snuggles

Re: Flywheel part number ID ? - 06/29/08 01:23 AM

OZ do you by chance know how to id a 4 speed crank?

a bit but figured you may know

Posted By: OzHemi

Re: Flywheel part number ID ? - 06/29/08 01:26 AM

As long as it has the machined hole for the pilot bearing, that's it, as far as I know?

As for a pic, it looks like a flywheel, but with that part number on the back

(have to dig out the camera in other words..)

Posted By: OzHemi

Re: Flywheel part number ID ? - 06/29/08 01:29 AM

Quote:

"Wink's as good as a nod! Say no MORE!"

Posted By: snuggles

Re: Flywheel part number ID ? - 06/29/08 01:30 AM

Quote:

As long as it has the machined hole for the pilot bearing, that's it, as far as I know?

As for a pic, it looks like a flywheel, but with that part number on the back (have to dig out the camera in other words..)

No need to dig it out I have a vision of it now

Posted By: wildman340

Re: Flywheel part number ID ? - 06/29/08 02:48 AM

That casting number was used on all flywheels from 62 to 72.

Posted By: OzHemi

Re: Flywheel part number ID ? - 06/29/08 02:51 AM

Quote:

That casting number was used on all flywheels from 62 to 72.

Thanks..that narrows it down abit at least

Posted By: John_Kunkel

Re: Flywheel part number ID ? - 06/29/08 09:17 PM

Quote:

That casting number was used on all flywheels from 62 to 72.

Actually it was used up into the nineties.

It's the common 130 tooth flywheel used on BB and SB engines starting in '62, some have external balancing drillings/scallops for use on cast crank motors and heavy rod BB's.

Posted By: OzHemi

Re: Flywheel part number ID ? - 06/29/08 09:24 PM

Thanks John

This one has no scallops,etc on it, so would be for a steel crank engine I assume then?