8 3/4 housing width?

I am confused & the more I read makes it worst. LOL. The measurement from flange to flange with no
backing plate should be 52" for a A body,54" for a B body & 56" for a E body. Am I correct?

and 59" for trucks and c-bodys oh my!

did you look at the chart in the archives here on the board?

I know the c-body and truck is the same 59"

I have one from a 67 polara that is 56" with 30" axles..IIRC.. thinking its E-body,but a 67 polara is a c-body

I have an A-body one in my truck,had it cut and dont remember what it was for A-body specs

I cant get them straight either..and one of the charts was wrong

http://www.moparts.org/Tech/Archive/axle/17.html

The correct info is here:

http://www.moparts.org/Tech/Archive/axle/16.html

Quote:

---

The correct info is here:

http://www.moparts.org/Tech/Archive/axle/16.html

---

Yep.

Someday, someone will give a cr@p enough to remove that chart from the server.