Small block intake

Which one do you guys think is a better intake Edelbrock Air-Gap or Weiand Stealth. I have a 78 Magnum with a 360 I'm looking to change out, both of these would be about a 1/4" higher than what I have now (stock w/spacer for square bore) I'm hoping either would fit height wise.

Air Gap

Stealth is a good intake as well.

Really depends on use. Intakes aren't a one size fits all, but, if the two choices are what you state, I'd do an air gap.

wouldnt not touch a weiand product until they start casting there stuff somewhere where they know there **** almost think they moved there casting to china....., just my

wieand and edelbrock are still made in the usa. i have supported wieand and there funky manifolds for 20+ years. no complaints.

?

Quote:

---

wieand and edelbrock are still made in the usa. i have supported wieand and there funky manifolds for 20+ years. no complaints.

?

---

it took 4 hours of welding to make my friends tunnelram useable, very pourus casting, and alot of time was needed to get the ports to match the heads wish i understand but making the plenum fit the base was another pain, sending it back was not an option due to the time it would take to get another one shipped....

no complaints on the eddy rpm airgap, have one and the casting looks very nice