Posted By: RUNCHARGER
426 Hemi manifolds and starters - 06/27/09 04:06 PM
Starter is pooched in my 472. What starters do you guys use with stock 426 Hemi manifolds? I'd like to use a newer Chrysler starter but I don't know if the connections on it rub the manifold or not. Aftermarket is okay if there is something that will last longer than a plane ride to China.
Thanks
Sheldon
Posted By: DAYCLONA
Re: 426 Hemi manifolds and starters - 06/27/09 04:28 PM
I run the PowerMaster Chrysler minis,.....never had a failure/problems,....Summit $200
FYI,...trim the top post main terminal, A little to long, very close to the block, other than that spins it over no problem, no heat soak problems either
Posted By: Jack Zupan
Re: 426 Hemi manifolds and starters - 06/28/09 01:02 AM
I don't think the PowerMaster has a piece to position the starter to the bellhousing indexing hole. How do you line one up to engage properly.