Moparts

balance on torque converter??

Posted By: beesting

balance on torque converter?? - 06/16/09 01:45 AM

changed 318 to a 360 in the 38 but left 318 trans in so instead of welding weights on converter my brother had a flex plate from summit i could use well put it in and starter just spins flex plate was used with a 727 my tran is a 904 the cylinder that pushes the gear in hits about 1/8 to big so is there a light weight starter that might clear or does summit sell a flex plate for a 904 or weld weights to converter??did't really want to drop tranny again Thanks

Attached picture 5295181-38.jpg
Posted By: scratchnfotraction

Re: balance on torque converter?? *DELETED* - 06/16/09 03:24 AM

Post deleted by scratchnfotraction
Posted By: mopars4ever

Re: balance on torque converter?? - 06/16/09 03:49 AM

summit has them for a 904 both with or without external balance
Posted By: John_Kunkel

Re: balance on torque converter?? - 06/16/09 08:07 PM

Quote:

uhh!! I am missing some thing here



Me too, punctuation would help.
Posted By: scratchnfotraction

Re: balance on torque converter?? *DELETED* - 06/16/09 09:12 PM

Post deleted by scratchnfotraction
Posted By: Sport440

Re: balance on torque converter?? - 06/16/09 09:29 PM

Quote:

sorry...

only went to the 8th grade.

cant spell either.

barly can type/write.

my bad...I will not post on here any more,if its a bother to you...





Kunkle wasnt referring to you. Now you missed something twice. mikie
Posted By: scratchnfotraction

Re: balance on torque converter?? *DELETED* - 06/16/09 10:08 PM

Post deleted by scratchnfotraction
Posted By: mopars4ever

Re: balance on torque converter?? - 06/16/09 10:39 PM

Quote:

trust me,I missed it a lot more than 2 times for sure

its only been the umpteenth time I have been told to punch and wait here on this board

I know I am a dumb azz hickabilly shadetree rabid parts changer

I am doing the best I can do with what little brain I have

so now I return you to the topic at hand



At least you try to help others with their problems. Some members here never venture to Q&A side of the board. All they want to do is talk politics, etc. Maybe they don`t know enough to help out.
Posted By: MoparforLife

Re: balance on torque converter?? - 06/16/09 11:16 PM

You need the flex plate for the 904 transmission and external balance 360. Available at summit.
Posted By: beesting

Re: balance on torque converter?? - 06/17/09 12:14 AM

I really am a high school grad.I was just in a hurry to type it and did't prove read it real good, I knew what i was tring to say , sorry Thanks for the answers
© 2024 Moparts Forums