3.0 V6 A/C BELT

Posted By: Slant69

3.0 V6 A/C BELT - 06/15/09 12:08 PM

I have a 92 LeBaron 3.0 V6, Anyone know how to remove the A/C belt? The manual was unclear on this. I saw the idler pulley and turned the bolt on top but pulley didn't move. Is there another bolt to loosen?

Posted By: stumpy

Re: 3.0 V6 A/C BELT - 06/15/09 03:03 PM

Looks like you loosen the bolt in the center of the pulley and then loosen the bolt on the top that points down. That bolt is the one that thightens the belt.

Posted By: rrunner

Re: 3.0 V6 A/C BELT - 06/15/09 10:18 PM

Quote:

Looks like you loosen the bolt in the center of the pulley and then loosen the bolt on the top that points down. That bolt is the one that thightens the belt.

BINGO! With any luck you didn't damage the adjusting bolt as they can bend or strip pretty easy when the pulley nut is still tight.