XV Power Window Install

Who has done it in a Challenger and did you take progression pics?.....If so...can you post pics of the placement of the regulator? I am trying to locate the fastening pattern on door..The only pattern I could find puts the window on a bad angle.. If not comfortable posting pics....please email to dgb1@chrysler.com

thanks

I had the same isssue when trying to install the Electric-life regulators.

There are two positions for the window regulators.

You must have it in the lower position (position 1 in pic) which will put it in a bad angle as you can see in the pic.

Put it into position 2 and ou should be good to go

Gil

well...If what you have works and is right....I see what I am doing wrong....I have the regulators in the proper location they are just flip flopped..according to your photo I have them on the wrong side....my regulators have a L and a R on them?...figured that ment left and right?....the way I have them it puts the regulator motor pointing towards the back and in the view of the small rectangular cutout in the door inner.....the wire connector is facing the rear of the door...