Posted By: Anonymous
Headers for a 1965 Dodge Coronet with a 440 - 06/06/09 02:47 AM
I need help finding a set of headers that will fit a 1965 Dodge Coronet with a 440? I have a set of Headman Elite Headers and they are nice but they rub on the drivers side torsion bar. Need a recommendation for a set that has good clearance, TTI or Dougs Headers?
Clint
Posted By: 65dodgebob
Re: Headers for a 1965 Dodge Coronet with a 440 - 06/06/09 02:54 AM
dougs headers are great. good fit, no dinging required, coating looks great,too. i was pleased.
Posted By: TooMany62s
Re: Headers for a 1965 Dodge Coronet with a 440 - 06/06/09 11:45 AM
I'm using TTI's. The first set of headers I've ever installed that didn't require any tube denting.
Posted By: 65rbdodge
Re: Headers for a 1965 Dodge Coronet with a 440 - 06/06/09 03:33 PM
i have tti`s on mine they fit great. if you want 3" exhaust pipes you will have to notch the trans cross member.
Posted By: Anonymous
Re: Headers for a 1965 Dodge Coronet with a 440 - 06/06/09 04:02 PM
What type of header did you go with? Did you use a long tube or a fenderwell header?
Clint
Posted By: TonyS451
Re: Headers for a 1965 Dodge Coronet with a 440 - 06/06/09 07:59 PM
I ran TTI 2" underchassis headers on my 65 Coronet wagon with a 440/stock heads and also 470/400 stroker/Indy heads. Fit perfect on both engines with no issues whatsoever. Great headers.
Posted By: jake4cars
Re: Headers for a 1965 Dodge Coronet with a 440 - 06/06/09 10:09 PM
I have TTI's and they fit very well, the only complaint I have is that they wanted more for them plain than with the stupid chrome plating, I would have much preferred ceramic but like everything else today, we are only the stupid consumer, customer service is gone, gone, gone.
Joey
Posted By: Anonymous
Re: Headers for a 1965 Dodge Coronet with a 440 - 06/08/09 01:43 PM
Are your headers fenderwell or under chassis?
Clint
Posted By: SCVpolara
Re: Headers for a 1965 Dodge Coronet with a 440 - 06/08/09 09:11 PM
I have some cheap Headmans on my 64 with a 440. They actually fit well with no dinging. Clears power steering. The collecter flange could be thicker but you get what you pay for. These were free.
Posted By: dart1962_440
Re: Headers for a 1965 Dodge Coronet with a 440 - 06/08/09 10:12 PM
Anyone have experience with the Headman's and a low deck in an early B?
Posted By: SCVpolara
Re: Headers for a 1965 Dodge Coronet with a 440 - 06/08/09 10:24 PM
These were on a 383 that was in the car. The clearance should be better than with a r/b. No starter clearance issues either.
Posted By: pushbutton
Re: Headers for a 1965 Dodge Coronet with a 440 - 06/08/09 10:26 PM
I'm running them in a 64 Polara with a 383,no problems. They would hit a small MP starter when I had them in a 63 Plym. with a 440. Ok with stock starter.
Posted By: lewtot184
Re: Headers for a 1965 Dodge Coronet with a 440 - 06/08/09 10:46 PM
2" tti's here. pefect fit.
very good welding and coating job and cost less than TTI's with a 2" tube with 3 1/2" collector.
